secureRus.com
designing and developing security systems for You
 
|Home||
           

Vehicle Barrier Systems

      
                 
 

The elecromechanical car barrier systems are used to control the access of motor vehicles into a residential, commercial, industrial or secured premise. The barrier operation of the system can be controlled by:-
- Manually by push buttons to open ot close the barrier by raising and dropping the barrier arm.
- By loop sensors embedded into the ground which will send a signal to the barrier either to lift or lower the arm when the vehicle passed over these loops.
- By access control system using magnetic proximity cards or transponder system.

Optional equipment
- Photoelectric cell system to prevent the barrier beam from coming down before the vehicle clears the barrier gates or the beam striking on a vehicle who is tail-gating the first vehicle.
- RFID remote control system or a Transponder system to enable the end-users to open the barriers without winding down the windows of the car. ( During rainy season or a storm)

  
FAAC International Barrier Gate Operators
  
 
       

FAAC Model 615

Big Benefits for Light - Medium Traffic
Specifically designed for light - medium traffic applications, the 615 can raise beams from 6 1/2 to 16 feet (2 to 4.9 meters) in 3 to 8 seconds. With a 50% duty cycle, the 615 is ideal for certain residential and commercial uses.

Dedicated Logic
The electronic intelligence of the 615 offers six types of control logics, including automatic and semi- automatic.
E - Garage door-like logic (signal to open signal to close)
A - Automatic logic (one signal opens the gate and closes it after a timed pause)
S - Security logic (much like the A logic, use full in high traffic applications to counter tailgating)
EP - Semi automatic logic (signal to open the gate, second to stop it, third reverses gate)
B - Manned, pulsed logic (designed for guard station use, requires 3-button switch (pulsed) to open, close and stop the gate)
C - Manned, constant logic (similar to B logic, but 3-button switch requires constant pressure on each button)

Easy to Maintain
Maintenance could not be simpler and diagnostic checks are immediate thanks to the input LEDs. Like all FAAC hydraulic operators, the 615 is completely self-contained for reliable operation.

Standard Features
The 615 has many standard features, including hydraulic anti-crushing safety, hydraulic locking so that the beam remains secure in the opened and closed positions, and a manual release with a personalized key. Also standard is the versatile 455 D control panel.
- Adjustable hydraulic pressures to control swing
- Hydraulic open & closed locking positions
- External key-operated manual release
- Simple interface with revenue control system
- Powder coated steel cabinet
- Versatile model 455D control panel
- Quiet operation
  
     
             
     
             
     

Avialable models:
Model 612 - an economic operator for medium length beams designed for light - medium traffic situations, 50% duty cycle. -Brochures to be avialable at a latter date.
Model 615 - Specifically designed for light - medium traffic applications, the 615 can raise beams from 6 1/2 to 16 feet (2 to 4.9 meters) in 3 to 8 seconds. With a 50% duty cycle, the 615 is ideal for certain residential and commercial uses.
Click here for the brochure of FAAC 615(pdf format)

PLEASE NOTE: when ordering you need to specify the length and type of beam you plan to install so the correct counterbalancing springs can be shipped.
       
All the images, promotion and technical materials on this web page are extracted from and the property of FAAC International USA and FAAC International group of companies.
       
   
For information and sales please contact: Kenny 97523165 or email sales@securerus.com
  
     
  secureRus reg no: 53041089M Tel no: 65 63451282 / Fax no: 65 62343769
111, North Bridge Road, #07-03, Peninsula Plaza, S179098		    
     
     
|Top of page|